The Insulation of Insulators; Insulators Are Getting Bigger

[Trade Journal]

Publication: National Glass Budget

Pittsburgh, PA, United States
vol. 22, no. 21, p. 6, col. 4


Commencing with the green bottle glass telegraph insulator, the size of a tea-cup, about ten years ago, the electric power-transmission engineers have been steadily increasing the size and cost of their high-tension insulators, until now they are using huge glass or porcelain insulators, the size of a cabbage. According to the "Electrical World," there has been no help for this visible swelling of the insulator. The little ones simply would not stand the electric stress, as the electric pressure rose by leaps and bounds. Even now the manufacturers would be ready to risk constructing transformers for one hundred kilovolts if the line engineers would accept that pressure. Perhaps the line engineers may do so before long. The question is what will their insulators then be? Will they be as large as umbrellas? Is long-distance transmission to be limited by the cost of conductors, or by the cost of insulators? A new suggestion is offered from Italy. Instead of placing the high-tension conductor on the top of the insulator, and arranging a series of porcelain petticoats beneath, so that a beetle would have to walk some 60 centimeters in the shortest path over the surface from wire to pin, the new insulator hangs the wire underneath the topmost petticoat which is expanded into a relatively thin umbrella. The purpose of the umbrella is only to shelter from rain and not to insulate; so that the umbrella can be made light and inexpensive. The actual insulator below the umbrella is stated to be considerably smaller than would be necessary in case the umbrella were removed.


Researcher notes: 
Supplemental information: 
Researcher:Bob Stahr
Date completed:February 16, 2008 by: David Wiecek;